Überblick

 
MicroClave Clear  | Neutral Displacement Connector

The Clear Choice to Help You

Visualize Connector Flushing

And Reduce the Risk of Bloodstream Infection

Intravenous (IV) therapy is essential to patient care, but accessing your patient’s bloodstream may increase the risk of infection.

The placement of an indwelling vascular access device may elevate a patient’s risk for bloodstream infection by creating a portal for bacterial entry. As a result, the design of your needlefree intravenous (IV) connectors plays a substantial role in your ability to prevent bacterial ingress and lower the risk of hospital-acquired bloodstream infections (HA-BSI).2

MicroClave’s proven needlefree IV connector technology can be an important element in your efforts to minimize the risk of bloodstream infections.

MicroClave Clear combines proven Clave® technology with a clear housing to help you visualize connector flushing after blood draws or administration while providing an effective microbial barrier against bacteria transfer and contamination.3,4,5
Ideal for a wide range of clinical applications and patient populations, MicroClave Clear is the optimal
facility-wide needlefree IV connector.

Request More Information

No Change in Clinical Practice or Technique

By allowing a single protocol to be used with all patient populations, MicroClave minimizes clinical training and in-servicing, while maximizing patient safety.

Use On All
Vascular Catheters

MicroClave can be used on all peripheral, arterial, and central venous catheters for blood draws or administration of IV medications.

Visualize Connector Flushing

The clear housing of the MicroClave allows for visualization of the internal fluid path upon flushing the connector.

Help Reduce Risk
of Infection

A mechanically and microbiologically closed system provides a safe and effective microbial barrier to help minimize infection risks.

How it works

Market-leading Infection Control Technology Proven
to Minimize Bacterial Contamination3,4,5,6,7,8

MicroClave Clear can help your efforts to reduce infection risks by minimizing entry points for bacteria
and maximizing the effectiveness of every flush.

 

Request More Information

 
Customize MicroClave

Design Patient-Ready Sets
Exactly How You Need Them.

Make the most of our clinically preferred needlefree technology with made-to-order
custom IV sets with no long-term contracts or minimum order requirements.

Read More
MicroClave

MicroClave is available with
a Clear or Blue housing

Technical Specs

Residual Volume: 0.04 mL
 
Flow Rate at Gravity: 165 mL / minute
 
Blood Compatibility: Yes
 
MRI Compatibility: Yes
 
High Pressure Compatibility: 10 mL / second

Drugs

Alcohol: Yes
 
Lipids: Yes
 
Chlorhexidine: Yes
 
Chemotherapy: Yes
SalineFlush

MicroClave Clear's saline flush option allows you to reduce risks, cost, and time associated with Heparin use.

 

References

  1. Breznock E M, DVM, PhD, Diplomate ACVS, Sylvia C J, DVM, MS., BioSurg, Inc. The in vivo evaluation of the flushing efficiency of different designs of clear needlefree connectors, March 2011. 

  2. Jarvis W., MD. Choosing the Best Design for Intravenous Needleless Connectors to Prevent Bloodstream Infections. Infection Control Today, August 2010 View >

  3. Ryder M, RN, PhD. Bacterial transfer through needlefree connectors: Comparison of nin different devices. Poster presented at the Annual Society for Healthcare Epidemiology of America (SHEA) conference 2007, Abstract 412.

  4. Moore C, RN, MBA, CIC. Maintained Low Rate of Catheter-Related Bloodstream Infections (CR-BSIs) After Discontinuation of a Luer Access Device (LAD) At an Academic Medical Center. Poster presented at the annual Association for Professionals in Infection Control and Epidemiology (APIC) Conference 2010, Abstract 4-028. View >

  5. Evaluation of the Clave® technology and resistance to microbial ingress. Report of a study commissioned by ICU and conducted by Nelson Laboratories, 2008. M1-1212 rev. 03

  6. Yebenes J, Delgado M, Sauca G, Serra-Prat M, Solsona M, Almirall J, et al. Efficacy of three different valve systems of needlefree closed connectors in avoiding access of microorganisms to endovascular catheters after incorrect handling. Crit Care Med 2008;36: 2558–2561.

  7. JD Brown, HA Moss, TSJ Elliott. The potential for catheter microbial contamination from a needleless connector. J Hosp Infect. 1997.; 36:181-189.

  8. Ryder M, RN, PhD. Bacterial transfer through needlefree connectors: Comparison of nine different devices. Poster presented at the Annual Society for Healthcare Epidemiology of America (SHEA) conference 2007.

  9. Guideline for the Prevention of Intravascular Catheter-Related Bloodstream Infections, Final Issue Review, May 17, 2010.

  10. Data on file at ICU Medical. Low Volume Flush Characteristics of Unique Needlefree Connectors M1-1223 Rev. 1.

Publications

Clinical Reports

Educational Seminars & Presentations

Needle Free Connectors

Needle-free Connectors: Split Septum vs. Mechanical Valve…Can this classification model predict infection risk? By Marcia Ryder, PhD MS RN. APIC 2010 Satellite Symposium, Tuesday, July 13th, 2010. Running time: 1hr. 27min.
Click Here to View the Seminar >

 

Produktreferenz

Print

Disinfect to Protect

  • When placing a new MicroClave Clear on a catheter, disinfect the catheter hub and prime the MicroClave Clear.
  • Before accessing a MicroClave Clear, always disinfect the injection site with the approved antiseptic per facility protocol.
  • Scrub the injection site in accordance with facility protocol for appropriate scrubbing and dry times.

Disinfect to Protect

Adminster or Aspirate

  • Attach IV tubing, syringe or blood tube holder to MicroClave Clear by inserting the luer and twisting ¼ turn, or until a friction fit is achieved.
  • Do not over-tighten a luer beyond the friction fit as this may damage both the luer and the MicroClave Clear.
  • To disconnect, grasp MicroClave Clear and then twist the mating luer away from MicroClave Clear until loose. Do not hold catheter hub during disconnect as this may cause accidental removal of MicroClave Clear from hub.

Adminster or Aspirate

Flush After Each Use

  • Flush the MicroClave Clear with normal saline or in accordance with facility protocol. After blood use, the MicroClave Clear can be flushed clean and does not require change-out.
  • Use routine flushing in accordance with facility protocol in order to maintain catheter patency.
  • Change MicroClave Clear in accordance with facility protocol and CDC guidelines.

Flush After Each Use

Technical Videos

MicroClave Clear In-Service Video

Your guide to the safe and effective use of MicroClave Clear.

Use Case Recommendations